Inorganic Mineral Core for Fire-Sensitive Projects
The A2 Aluminum Composite Panel is developed for high-rise curtain walls, public facilities, and interior decoration projects with higher fire-safety requirements. It consists of upper and lower aluminum sheets bonded to a high-proportion inorganic mineral core.
The commonly used total panel thickness is 4 mm. The face sheet thickness is 0.3–0.5 mm, and the back sheet thickness is also 0.3–0.5 mm. These specifications can be adjusted according to project requirements.
According to the supplied product information, the inorganic mineral core gives the product an A2 fire classification position. It does not burn and does not produce toxic smoke or molten droplets when exposed to fire.
The composite construction also improves general panel flatness. It helps reduce noticeable wave-like reflections after large wall or curtain wall areas are installed.
Standard and Long-Panel Dimensions
The standard panel size is 1220 mm × 2440 mm. The maximum customizable size is 1570 mm × 6000 mm.
This range supports both standard building divisions and projects that require longer panels with fewer joints. The A2 Aluminum Composite Panel can be processed for exterior curtain walls, interior walls, column coverings, entrances, and local architectural forms.
Reinforcement rib spacing is controlled within 600 mm and can be optimized according to panel dimensions, installation height, and project wind pressure.
The panel reaches a wind-pressure performance of ≤5 kPa according to GB/T 15227 and can reach up to 7 kPa.
Available installation options include box-shaped folded-edge mounting, riveting, and bolt-fixed concealed curtain wall systems. Expansion gaps are reserved to accommodate dimensional movement caused by temperature changes.
Surface Options and Factory Development
Available finishes include solid colors, metallic colors, wood grain, stone patterns, and anodized effects. Colors can be customized according to project requirements.
The product can be used for high-rise and medium-rise curtain walls, transportation and cultural facilities, commercial complexes, chain stores, interior fire-resistant walls, and column coverings.
Zhejiang Ouzhijie Aluminum Co., Ltd. was established in 1995 and manufactures aluminum composite panels, solid aluminum panels, honeycomb panels, corrugated panels, three-dimensional aluminum panels, and ceiling products.
The technical team can review architectural drawings or prototypes and assist with panel thickness, dimensions, folded edges, mounting nodes, and surface colors before production.
Samples, Production, and Shipping
OEM, ODM, and drawing-based production are supported. The minimum order quantity is 2,000 square meters. Different colors or models may be combined within one qualifying order.
Custom sample development normally takes 10–15 days. The sample can be provided, while transportation costs are paid by the buyer.
Standard production normally requires about 15 days. Customized production generally requires 15–25 days. Photos or videos may be supplied during manufacturing.
Every finished product receives a 100% inspection before packaging, and third-party inspection is accepted. Wooden pallet or non-pallet packaging is available. EXW, FOB, and CIF trade terms are supported.

Product Specifications
|
Parameter |
Typical Value / Range |
|
Panel Thickness |
Face sheet 0.3–0.5 mm; back sheet 0.3–0.5 mm; commonly 4 mm total |
|
Wind-Pressure Performance |
≤5 kPa according to GB/T 15227; up to 7 kPa |
|
Panel Size |
Standard 1220 mm × 2440 mm; maximum 1570 mm × 6000 mm |
|
Reinforcement Rib Spacing |
≤600 mm; optimized according to wind-pressure calculations |
|
Connection System |
Box-edge mounting, riveting, or bolt-fixed concealed curtain wall system |





