The Impact Of The Production Process Of Aluminum Honeycomb Panels For Buildings

Jun 07, 2026

Leave a message

Aluminum honeycomb panels are produced using hot presses. Due to the high pressure of the hot press, it is difficult to control, and spacers are often placed to prevent the aluminum honeycomb core from collapsing. If the spacers are too high, it will affect the applied pressure, resulting in low bonding strength. If a flatbed hot lamination machine is used, the pressure is provided by elasticity, and the applied pressure can be controlled by adjusting the height. Therefore, aluminum honeycomb panels produced using this process have higher and more stable bonding strength.

 

Oil, dirt, and naturally formed loose oxide layers on the aluminum surface can severely affect the bonding effect of aluminum honeycomb panels. Therefore, cleaning and pretreatment are necessary. Phosphating or chromating treatments can be applied to the aluminum surface to form a dense chemical conversion film, resulting in better bonding performance.